Surface Veil for FRP

Product properties:

- E-glass

- consitant fiber dispersion

- soft hand-feeling

- fast impregnation

- good moulding properties

- high physical and chemical performance for final products

Technical information:

Product code	Density gr/m²	Binder content %	Impregnation time, 2 layers sec	Tensile strength N/5cm	Moisture content %
VSV-W20	20	6,0 - 9,0	< 8,0	≥ 35	< 0,2
VSV-W30	30	6,0 - 9,0	< 10,0	≥ 40	< 0,2
VSV-W40	40	6,0 - 9,0	< 15,0	≥ 50	< 0,2
VSV-W50	50	6,0 - 9,0	< 20,0	≥ 60	< 0,2
VSV-W60	60	6,0 - 9,0	< 25,0	≥ 70	< 0,2
VSV-H30	30	6,0 - 9,0	< 10,0	≥ 20	< 0,2
VSV-H50	50	6,0 - 9,0	< 15,0	≥ 25	< 0,2
VSV-H60	60	6,0 - 9,0	< 20,0	≥ 30	< 0,2

- More information is available in quality analysis report

- Width will be produce according customers requirements

Applications:

Process	Product code
Process	VSV-W20 - W60	VSV-H30	VSV-H40	VSV-H50
Hand-lay up	0	+	+	+
Spray-up	0	+	+	+
Vacuum injection	+	0	0	+
Press moulding	+	0	+	+
Winding	+	0	+	0
Continuous impreg	0	-	-	-
Pultrusion	-	-	-	-
Centrifugal casting	+	0	0	0

“+” is suitable / “0” is partial suitable / “-“ is unsuitable

Packaging:

Roll diameter with a maximum of 100cm, wounded on a carton core with an internal diameter of 15cm. Further packaging according to the customer's requirements.

Storage:

The product should be stored under dry conditions at a temperature between 15ºC and 35ºC. Should the temperature be below 15ºC, it is necessary to store the material at least 24 hours prior to their use in the processing area.