| Low Weight Chopped Strand Mat |
|
Technical information:
Product code: Low Weight CSM Glass type: E-glass Binder type: Emulsion or powder Density: 80, 100, 120 and 150gr/m˛ Stand. roll width: 1040mm and 1270mm Other widths: 150mm 1300mm Filament diameter: 12 ĩm (microns) Styrene solubility: ≤50 sec Moisture content: ≤0,20 Loss on ignition: 2,0-8,0% Resin: UP and EP
- More information is available in quality analysis report Product information:
E-glass low weight chopped strand mat bounded by a powder or emulsion binder, applying for hand-lay up press moulding and a reinforcement for UP-resins. The properties are: - easy wet out and fast impregnation - excellent spreading of fiber and binder - high mechanical strength during production of finished products - excellent process ability in complex open and closed moulding.
Applications:
- Hand lay-up - Press moulding
Packaging:
The chopped strand mat is packed in a PE-bag and carton box. For 1270mm 12 boxes are packed vertically in the first layer pallet and 9 boxes are packed horizontally on the second layer pallet. 965mm and 1040mm are packed by 12 vertical boxes per each pallet. Packaging for special widths must be discussed from case to case.
Storage:
The product should be stored under dry conditions at a temperature between 15ēC and 35ēC. Should the temperature be below 15ēC, it is necessary to store the material at least 24 hours prior to their use in the processing area. |
|||||||||||||||||||||||
|
|
